![Prima della lucidatura](https://www.lucidaturastampi.com/wp-content/uploads/2018/09/lavorazione-prima.jpg)
![Dopo la lucidatura](https://www.lucidaturastampi.com/wp-content/uploads/2018/09/lavorazione-dopo.jpg)
1
The decreasing
It’s the first step with metal and one of the first working carried out choosing the best raw materials, soft and hard stones, abrasive rotators and webs. These are often set up on especially modified equipments to get the best results and degrease the mold from the residues left during the working process of the machine tools.
2
Semi-finishing
The manual or mechanic semi-finishing is the productive phase where abrasive webs and stones with different grains (from the biggest and decreasing to the finest) are used. In this working the competence makes the difference, because thanks to the know-how obtained with several years of workings, we can make the right choice according to the bases to treat and cross different grains of abrasive for the best preparation of the base to the final finishing.
3
The dressing
The dressing obtained with wood, fibres, felts and dressing pulps is the final phase of the whole working and the greatest moment of finishing phase. At the end of this productive pathway we will get a perfect and accurate finishing of the mold and the highest lustre possible. So the client can obtain the best results required and, at the same time, the high standard of professionalism of Nuova Stampolux.